Complete Thermal Partner for Hot Systems, Cold Systems & Structural Insulation

Anton Therm delivers turn-key industrial insulation solutions: from auditing, engineering design, material sourcing, manufacturing and site execution to operational partnership.

Request Site Survey

Anton Therm Value

Industrial Thermal Control

We formulate engineering balances instead of generic insulation wrapping.

Beyond individual components. Solving the complete thermodynamic balance.

Within any processing plant or industrial facility, thermal dynamics are interconnected. Hot systems must isolate energy, cold systems must prevent dew-forming condensation, and roof or wall panels must control environmental leakage.

Therefore, Anton Therm acts as a holistic thermal partner. We begin by auditing system structures, operating conditions, usage targets and actual energy-loss hotspots.

From there, we engineer the proper blueprint: durable fixed insulation, removable FlexInsul jackets, structural thermal panels or retrofitting upgrades for legacy piping corridors.

Free audit request

From site analytics to operational longevity

Anton Therm is not just a site contractor. We manage the full lifecycle of insulation assets and keep a single point of professional engineering accountability.

Thermal survey

Map temperature, humidity, old material condition and real energy-loss points.

Engineering consultation

Balance energy savings, safety, aesthetics and investment cost.

Technical design

Choose materials, calculate thickness and draft protective structures.

Site execution

Prefabricate, deliver and install under industrial progress requirements.

Lifecycle support

Support inspection, maintenance and partial upgrades when layouts change.

Three specialized thermal solution packages

Engineered to answer specific environmental requirements, process parameters, safety guidelines and budget goals.

Group 1: Industrial Hot Systems

High-temperature equipment such as boilers, steam headers, hot vessels, heated pipelines and heat exchangers suffer enormous radiative losses if left under-insulated.

Anton Therm hot-system insulation retains energy, reduces fuel consumption and lowers outer surface temperature toward safe contact thresholds.

Primary industrial applications

Boiler Steam pipe / steam pipeline Hot water tanks Hot oil tanks Heat exchanger Drying pots / ovens Furnace Reactor Valves, elbows, tees, flanges Y-strainers, pumps, turbines

Engineered cores & wraps

Rockwool mineral insulation Ceramic Fiber blankets Calcium Silicate Foil-faced Glasswool Aluminum / stainless / galvanized cladding Removable FlexInsul jackets Glassfiber tapes and fastening straps

Tangible results & values

Reduce energy losses significantly.
Maintain stable steam temperature and pressure.
Lower machine-room and contact surface temperature.
Reduce corrosion under insulation.
Improve utility room aesthetics.
Simplify valve maintenance.

Common operating critical failure events

Steam lines lose pressure along long pathways.
Machine rooms become hot and uncomfortable for operators.
Old insulation becomes soggy, compacted and causes CUI.
Valves and fittings remain bare after maintenance.
Metal cladding becomes dented, rusty and visually poor.
Fuel cost rises abnormally.

Anton Therm systematic actions

✓ Survey temperature, pipe length and equipment geometry.
✓ Specify heat-resistant materials such as Rockwool, Ceramic Fiber and Calcium Silicate.
✓ Design multi-layer systems to reduce convection and radiation loss.
✓ Fabricate aluminum, stainless steel or galvanized cladding.
✓ Produce removable FlexInsul jackets for valves, strainers and flanges.
✓ Restore and upgrade legacy hot insulation.

All designed blueprints are certified using FLIR thermal cameras.

Group 2: Industrial Refrigeration Systems

Industrial refrigeration, chiller water lines, AHU, FCU, VRV/VRF piping, ducts and cold rooms require tightly sealed insulation to block moisture ingress.

Anton Therm builds a reliable vapor barrier that reduces power load, prevents cold loss and eliminates surface condensation.

Primary industrial applications

Chiller machinery Chilled water pipelines Chilled water reservoirs AHU / FCU VRV / VRF systems Cold storages Freezers Blast tunnels Seafood refrigeration loops Air ventilation ducts Cold storage panels

Engineered cores & wraps

Closed-cell Nitrile rubber PU / PIR blocks Cold-system contact adhesives Reinforced aluminum tapes Vapor barrier sheets Protective PVC jacketing Phenolic / PU insulated supports

Tangible results & values

Eliminate condensation on cold pipes.
Maintain stable cold delivery.
Protect steel pipes from moisture corrosion.
Reduce chiller operating load.
Keep mechanical rooms clean and safe.
Extend insulation service life.

Common operating critical failure events

Chilled pipes sweat and drip onto equipment.
Elastomeric rubber cracks and opens at joints.
Chiller compressors work harder due to cold loss.
Moisture trapped inside insulation corrodes steel pipes.
Mold and mildew appear around pipes and ducts.

Anton Therm systematic actions

✓ Measure cold-line temperature and dew point.
✓ Select suitable elastomeric / PU / PIR insulation thickness.
✓ Seal joints completely with specialized adhesives.
✓ Apply aluminum foil, reinforced tapes or PVC jacket protection.
✓ Treat pipe supports to avoid thermal bridges.

All designed blueprints are certified using FLIR thermal cameras.

Group 3: Roof, Wall & Panel Insulation

Roof, wall and panel insulation controls heat transfer through building envelopes, stabilizing factories, technical rooms, cold rooms and cleanrooms.

Anton Therm selects panel structures, reflective layers and core materials based on heat resistance, noise control, fire safety and mechanical durability requirements.

Primary industrial applications

Factory roofs Metal roofing systems Insulated partition walls Cold storage panels Cleanroom / technical panels Insulated dropped ceilings Insulated exterior walls Preservation storages Heat shielding zones

Engineered cores & wraps

PU / PIR / EPS sandwich panels Fire-safe Rockwool panels Radiant barrier sheets Aluminum bubble insulation Aluminum / metal profiles Specialized sealants, screws and suspension systems

Tangible results & values

Reduce heat transfer through roofs and walls.
Stabilize indoor working conditions.
Reduce HVAC or refrigeration load.
Improve control of cleanliness, humidity and noise.
Upgrade building aesthetics.
Install flexibly by zone.

Common operating critical failure events

Metal roofs absorb heat and overheat the factory.
Wall partitions and panels leak through poor joints.
Cold rooms lose cooling through the envelope.
Technical rooms need heat and noise control.
Old envelope systems degrade and become hard to maintain.

Anton Therm systematic actions

✓ Survey sun exposure, roof temperature and room requirements.
✓ Select PU/PIR/EPS panels or fire-safe Rockwool panels.
✓ Seal panel joints and corner profiles tightly.
✓ Install radiant barriers for roofs, walls or ceilings.
✓ Plan partial retrofit to avoid unnecessary replacement.

All designed blueprints are certified using FLIR thermal cameras.

Deteriorated cladding & insulation can be remodeled

For processing plants running old insulation, Anton Therm can repair, recalibrate and upgrade key sections to restore efficiency and safety without costly complete replacement.

Applicable retrofitting diagnostics:

Steam lines with rusty or loose metal cladding.

Chiller pipes with aged rubber insulation and dripping condensation.

Factory roofs, walls or panels with open joints.

Valves and flanges left bare after maintenance.

Utility rooms with unsafe hot contact surfaces.

Send hotspot photos for advice Schedule site thermal diagnostic